Soft roof repairs often. But, if everything is done correctly, the roof without leaks will last ten years. Destructive factors also lead to damage to the coating.
Do-it-yourself soft roof repair comes down to patchwork or laying a new coating. The roof is called soft, since the protection of the roof is carried out by rolled “soft” materials, with a fabric, cardboard or fiberglass base, with a layer of bitumen applied. You can buy the necessary materials for the repair and renovation of the roof here /.
The roof is laid by gluing the material with bituminous mastic or fusing with a gas burner.
Before sticking the patch, clean the desired area, cut off the torn off pieces of material and heat until the bitumen melts. Lay the patch and melt it. Fill the seam with bitumen.
The old rolled carpet is dismantled with a bayonet shovel or a strong spatula. If there is no need, do not remove the old coating, melt it with a burner to create a smooth surface. Stick the strips across the slope from the bottom up, overlapping twenty centimeters.
When calculating the required amount of roofing material, consider these percentages.
Prepare bituminous mastic in a barrel or bucket, closing the container with a lid.
It is more convenient to stick the roofing felt together – one rolls out the roll, the other applies the mastic.
Vapor barrier rarely deteriorates, usually along with the destruction of the ceiling. Unreinforced screed fails simultaneously with the coating. But if you remove the destroyed layer of roofing material, destroy the low-quality screed. The screed needs repair, if some places are crumpled, a crunch is heard under pressure.
Do-it-yourself garage soft roof repair with bikrost laying differs only in that the material is rolled out as needed. Yes, and you do not have to heat the resin to apply it to the roof. The bottom layer of the material is oxidized with bitumen. The rest of the process is similar to the laying of roofing material.
