Spray gun allows you to quickly and evenly coat the required surface with varnish or paint. If you cover with a simple brush or roller, then it is impossible to achieve such a uniform layer.
To achieve speed and quality, you need to use this tool correctly. Also, an important point is which manufacturer you will prefer.
Modern spray guns deliver varnish and paint from a container to a nozzle using a pump. A special adjustment screw on the sprayer handle allows you to adjust the amount of liquid supplied. Before painting, check the viscosity and adjust the nozzle. Depending on the width of the surface to be painted, narrow jet and flat jet nozzles are used.
The tool is held at a distance of 18-20 cm from the surface to be painted. During operation, the gun must not be shaken or pumped. It is necessary to lead parallel to the surface to be painted at the same distance. The next strip is applied so that it slightly overlaps the edge of the previous one.
It is recommended that before starting work, adjust the sprayer, release the paint on a sheet of paper. Gun – the spray gun must be held so that the paint container is not higher than the nozzle. The surface to be treated is always perpendicular to the sprayer. Good luck!
